Splinterlands Social Media Challenge: Swamp Spitter Sculpture

Portada.jpg

Greetings NFT and splinterlands lovers. As you well know, I am a sculptor so I use to make a lot of figures in different moldable materials. Thinking a bit about splinterlands, I wanted to make a full body figure, since I had some time without making a sculpture of this style.

The figure I made is inspired by the Swamp Spitter, one of the splinterlands cards. Below you can see a picture of the character and the card.

Saludos amigos amantes de los NFT y de splinterlands. Como bien saben, soy un escultor así que acostumbro a hacer muchas figuras en diversos materiales moldeables. Pensando un poco en splinterlands, quise hacer una figura de cuerpo completo, ya que tenía tiempo sin hacer una escultura de este estilo.

La figura que hice está inspirada en el Swamp Spitter, una de las cartas de splinterlands. A continuación pueden ver una foto del personaje y de la carta.

f1.jpg

Swamp Spitter.png

Source / Fuente:
https://next.splinterlands.com/card-detail/520/regular/10?tab=lore

Step by step:

As I always do with my figures, I will show you briefly how I made this figurine, as I believe that the step by step always enriches the way in which a finished figure is shown. Especially in this case, being that the figure is pretty cool.

As you can see, it is a full body figure, so to make this kind of figures it is necessary to make a base. I started with the feet, or at least with the base for the feet, which is the orange piece of plasticine, then I placed the green feet on top of this orange base.

Paso a paso:

Como siempre acostumbro en mis figuras, les mostraré de manera breve cómo hice esta figurita, pues creo que el paso a paso siempre enriquece la manera en cómo se muestra una figura ya terminada. Sobre todo en este caso, siendo que la figura es bastante genial.

Tal como pueden ver, es una figura de cuerpo completo, así que para hacer este tipo de figuras es necesario hacerle una base. Comencé con los pies, o al menos con la base para los pies, que es el trozo naranja de plastilina, luego le coloqué los pies de color verde encima de esta base naranja.

1.jpg2.jpg

After making the feet, I continued with the calves and thighs. On the lower legs I made them in dark green and the legs I made them in the common color of the body.

Después de hacer los pies, continué con las pantorrillas y muslos. En la parte baja de las piernas las hice de color verde oscuro y las piernas las hice del color común que lleva el cuerpo.

3.jpg4.jpg

I continued with the torso, making it quite large and shaped, then I continued with the arms, making them as defined as I could, despite the tiny size of the figure. She is small, so it was hard, but I made them well defined because the character is like that.

Continué con el torso, haciéndolo bastante grande y formado, luego continué con los brazos, haciéndolos de la manera más definida que pude, a pesar del diminuto tamaño de la figura. Es pequeña, así que me costó, pero los hice bien definidos pues el personaje es así.

5.jpg6.jpg

I made both the left and the right arm, and after finishing them I started to mold the neck and finally the face. To make this character's head I was inspired by the famous ninja turtles, because I thought it was a good way to represent this character in 3D.

Hice tanto el brazo izquierdo como el derecho, luego de terminarlos comencé a moldear el cuello y finalmente el rostro. Para hacer esta cabeza del personaje me inspiré en las famosísimas tortugas ninjas, pues me pareció una buena manera de representar a este personaje en 3D.

7.jpg

As for the chest, I didn't make it so defined because I had the chest plates that these turtles usually have. I also made the garment he wears at the waist, the brown forearm protectors and as I said, the chest plates.

En cuanto al pecho no lo hice tan definido pues tenía las placas del pecho que suelen tener estas tortugas. También le hice la prenda que usa en la cintura, los protectores de los antebrazos de color marrón y como dije, las placas protectoras del pecho.

9.jpg10.jpg

As for accessories, I made the small hat and the shell that the character has on his back. Both are pieces that make him characteristic as an anthropomorphic turtle.

En cuanto a accesorios, le hice el pequeño sombrero y el caparazón que tiene en la espalda el personaje. Ambos son piezas que lo vuelven característico como tortuga antropomórfica.

11.jpg8.jpg

I put each piece in place and it already looked just great, but to give it a better look, I started coloring it to make it look much better. I used the dry painting technique for some things and thinned paint for other parts of the body.

Coloqué cada pieza en su lugar y ya se veía simplemente genial, pero para darle un aspecto mejor, comencé a colorearlo para que se viera mucho mejor. Usé la técnica de pintado en seco para algunas cosas y pintura diluida para otras partes del cuerpo.

13.jpg

This is how it was finished. Below you can see a series of pictures of the final result:

De esta manera quedó terminada. A continuación pueden ver una serie de fotografía del resultado final:

f4.jpg

f5.jpg

f2.jpg

f8.jpg

f3.jpg

f6.jpg

This is my participation in the Social Media Challenge of Splinterlands, this cool card game where there are many characters like the one I have shared with you.

If you like to register in splinterlands, you can do it following this link:
https://splinterlands.com?ref=gaboamc2393

If you want to know more about this challenge, you can visit the post link:
https://peakd.com/hive-13323/@splinterlands/splinterlands-social-media-challenge-sgskqv

Well folks, that's all for now. I invite you to leave your opinions below in the comments, as always I will be happy to read them. With nothing more to add, I'll say goodbye then...

See you next time!

Esta es mi participación en el Social Media Challenge de Splinterlands, este juego genial de cartas donde existen muchos personajes como el que les he compartido.

Si gustan registrarse en splinterlands, pueden hacerlo siguiendo este enlace:
https://splinterlands.com?ref=gaboamc2393

Si desean saber más sobre este reto, pueden visitar el enlace del post:
https://peakd.com/hive-13323/@splinterlands/splinterlands-social-media-challenge-sgskqv

Bien amigos, esto ha sido todo por ahora. Los invito a dejar sus opiniones abajo en los comentarios, como siempre estaré encantado de leerlos. Sin más que agregar, me despido entonces...

¡Hasta la próxima!


Separador.png

7.jpg



0
0
0.000
14 comments
avatar

Wowwwwwwww this sculpture turned out great, how much detail the character has, you managed to capture in image and likeness all his essence. I loved it... <3



Wowwwwww esta escultura quedo genial, cuanto detalle tiene el personaje, lograste captar a imagen y semejanza toda su esencia. Pues lo ameeeee... <3

!PIZZA
!LUV
!MEME

0
0
0.000
avatar

Quedó genial, la idea era darle mucho detalle para que se pareciera lo más posible al personaje, a mi estilo, pero que se pareciera.

0
0
0.000
avatar

Muy original amigo 👏🤩

0
0
0.000
avatar

Gracias! Me alegra que te haya gustado. Saludos cordiales!

0
0
0.000
avatar

Congratulations @gaboamc2393! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 210000 upvotes.
Your next target is to reach 220000 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000